描述
The Ramset TrakFast 800 is the most technologically advanced gas tool on the market. The new TrakFast 800 offers a number of innovative features allowing quicker, safer installation of partitioning track, pest control mesh and formwork systems. With the 50 pin magazine and extra power, the speed at which the TrakFast 800 is able to perform installations provides tremendous savings in total installed cost.
Suitable For
‧ Concrete
‧ Composite steel decking
‧ Solid brick
‧ Precast
‧ Steel
‧ Pre-stressed concrete
‧ Hollow block wall
‧ Reinforced concrete
‧ Reinforced prefabricated concrete
Application
‧ Fixing partitioning track systems to concrete, masonry, block and structural steel
‧ Fixing particle board flooring to steel joists
‧ Fixing termite protective mesh to concrete, brick, block and structural steel
‧ Fixing timber to concrete, brick, block and structural steel
‧ Fixing foils, membranes and mesh to concrete, brick, block and structural steel (using 25mm steel washers and magnetic fastener guide)
| Weight | 3.8kg |
| Height | 309mm |
| Length | 396mm |
| Magazine capacity Magazine capacity | 20 (+3) pin magazine [optional 50 (+3) pin magazine accessory] |
| Impact force | 100J |
| Actuation pressure | 5kg |
| Overdrive | 4mm (adjustable) |
| Intermittent operation | 2 pins per second |
| Fuel cell life | 600 pins (approx) |
| Battery charge capacity | 3,000 pins (approx) |
| Voltage | 3.7V |
| Amperage | 600mA |
| Charge time | 1.5 hour (25mins for 500 fixings) |
INSTALLATION GUIDE
Standard Operating Procedure
Always read and understand the instruction manual before attempting to operate a Ramset™ Gas Technology Tool.
1. First insert the fuel cell and battery into the tool.
2. Insert the collated fasteners into the magazine.
3. The tool should then be compressed against the work surface. (Making sure that the tool is perpendicular to the work surface).
4. Once the tool is compressed the trigger can be actuated and the fastener is driven through the material being fastened and into the substrate.
